- The SimpleAuthService Sample
- Database and LDAP-based Authentication - The AuthAdminService
- Setting up the Authentication/Authorization Database
- Configuring the AuthAdminService
- Using the AuthAdminService
- Managing Users, Roles and Permissions
- Using LDAP for User Authentication and Authorization
The Open Service Platform provides some basic support for user authentication and authorization, based on the Poco::OSP::Auth::AuthService interface. The OSP core library itself does not provide an implementation of the AuthService interface. A very simple implementation of the interface is provided by the SimpleAuthService sample, found in the OSP/samples directory.
Poco::OSP::Auth::AuthService only defines two methods, authenticate() and authorize(). The former method is used to authenticate an user based on a user name and credentials/password combination. The latter one is used to verify that a given user has a certain permission.
Authentication in OSP is based on user name and credentials. In the simplest case, the credentials used to authenticate a user consist of a simple password. However, more complex schemes (e.g., based on certificates) are theoretically possible. An implementation of the AuthService normally is based on a database of user names and passwords. The authenticate() member function of a subclass of Poco::OSP::Auth::AuthService has to verify that the given combination of user name and credentials is a valid one. The authenticate() member function is defined as follows:
bool authenticate(const std::string& userName, const std::string& credentials) const;
Authorization in OSP is based on the concept of permissions. In OSP, a permission is a simple string denoting a certain privilege. The authorize() method of Poco::OSP::Auth::AuthService checks whether a user identified by a user name has a certain permission. How user names and permissions are associated is up to the actual implementation of AuthService. The possibilities range from a simple configuration file specifying the permissions for each user name to a sophisticated authorization concept based on user groups and roles. For the most part, OSP does not care about user permissions. For example, the Web bundle allows to specify a required permission for accessing a certain path on the server. How the permission is named is not of interest to the Web library — it simply checks that the user (obtained from HTTP Basic authentication) has the specified permission.
The authorize() member function is defined as follows:
bool authorize(const std::string& userName, const std::string& permission) const;
A very simple implementation of AuthService can be found found in the OSP/samples/SimpleAuthService directory.
The SimpleAuthService only knows two users — "user" and "admin". Any password is valid for "user". The password for "admin" can be set (as clear text) in the global configuration file with the "adminPassword" property, e.g.:
adminPassword = s3cr3t
If no password has been set in the global configuration file, a default password (stored in the bundle's properties) is used. The default password is "admin". The "admin" user has all permissions. The set of permissions for "user" can be set in the global configuration file, using the "userPermissions" property. The permissions are specified as a comma-separated list, e.g.
userPermissions = somePermission, someOtherPermission
The service is registered under the service name "osp.auth" and can be obtained using the Poco::OSP::ServiceFinder helper class:
Poco::OSP::Auth::AuthService::Ptr pAuthService = Poco::OSP::ServiceFinder::findByName<Poco::OSP::Auth::AuthService>(pContext, "osp.auth");
Starting with release 2014.1, OSP comes with a new and extended implementation of the AuthService. The new service is called AuthAdminService and is defined and implemented in the com.appinf.osp.auth bundle. As its name implies the service not only provides the authenticate() and authorize() methods known from the Poco::OSP::Auth::AuthService, it also provides methods for managing user accounts and permissions. There is also a shell command available for managing users, roles and permissions. The AuthAdminService requires a commercial license.
The following features are supported:
- User and role-based permission grants.
- User accounts and permissions are stored in a SQL Database (other database types can be supported as well).
- LDAP server integration. Users can be authenticated via an LDAP server and permissions and roles can be assigned via LDAP attributes.
- In-memory caching of password hashes and permissions.
User authentication and authorization is based on the concepts of users, roles and permissions. Every user account can be assigned a list of permissions and a list of roles. Every role can be assigned a list of permissions as well. The effective permissions of a user are the permissions directly granted to him, as well as the permissions granted via its assigned roles.
The default AuthAdminService implementation in the com.appinf.osp.auth.data bundle uses a SQL database for managing users, roles and permissions. In order to use the service, a database must be set up and the service must be configured to use a specific database. The Data library from the POCO C++ Libraries is used for database access, therefore the service is independent from the underlying database engine. ODBC, MySQL and SQLite can be used.
Following is the database schema required by the AuthAdminService:
CREATE TABLE auth_user ( username VARCHAR(64) PRIMARY KEY NOT NULL, password VARCHAR(64) NOT NULL ); CREATE TABLE auth_role ( rolename VARCHAR(64) PRIMARY KEY ); CREATE TABLE auth_user_roles ( username VARCHAR(64) NOT NULL REFERENCES auth_user(username) ON DELETE CASCADE, rolename VARCHAR(64) NOT NULL REFERENCES auth_role(rolename) ON DELETE CASCADE ); CREATE TABLE auth_user_permissions ( username VARCHAR(64) NOT NULL REFERENCES auth_user(username) ON DELETE CASCADE, permission VARCHAR(64) NOT NULL ); CREATE TABLE auth_role_permissions ( rolename VARCHAR(64) NOT NULL REFERENCES auth_role(rolename) ON DELETE CASCADE, permission VARCHAR(64) NOT NULL ); CREATE TABLE auth_user_attributes ( username VARCHAR(64) NOT NULL REFERENCES auth_user(username) ON DELETE CASCADE, attribute VARCHAR(64) NOT NULL, value VARCHAR(256) NOT NULL );
After setting up the tables, at least one initial user account must be created. Usually, this will be an administrator account with the necessary permissions to perform further administrative tasks using the OSP Shell service.
The following statement creates a user named "admin" with password "admin":
INSERT INTO auth_user VALUES("admin", "3d29e163b9107fcb31077b45b47026e2");
The password is not stored in clear text in the database. Only a salted hash of the password is stored. The salted hash of the password is computed by concatenating the salt with the password and computing the MD5:
passwordHash = MD5(salt | password)
The salt can be configured in the bundle.properties file in the com.appinf.osp.auth.data bundle (property auth.passwordSalt) and should be unique for each application.
On Linux systems, the has can be computed with the md5sum command:
$ echo -n "saltpassword" | md5sum
On OS X and BSD systems, the md5 utility can be used:
$ md5 -s "saltpassword"
Important: MD5 hashes are no longer considered secure. However, newer versions of the AuthAdminService use a more secure hashing algorithm (PBKDF2), and the initial MD5 password hash will be automatically upgraded upon the first successful login. Nevertheless, only the initial account should be created this way.
The following permissions used by OSP should be granted to the administrator:
- bundleAdmin: allow access to the BundleAdmin web application.
- authAdmin: allow access to the auth Shell command.
This can be done with the following SQL statements:
INSERT INTO auth_user_permissions VALUES("admin", "bundleAdmin"); INSERT INTO auth_user_permissions VALUES("admin", "authAdmin");
Instead of granting the permissions directly to the user account, a role can be used instead. In this case, the permissions are granted to the role, and then the role is assigned to one or more user accounts:
INSERT INTO auth_role VALUES("systemAdmin"); INSERT INTO auth_role_permissions VALUES("systemAdmin", "bundleAdmin"); INSERT INTO auth_role_permissions VALUES("systemAdmin", "authAdmin"); INSERT INTO auth_user_roles VALUES("admin", "systemAdmin");
After the database tables have been set up, the service must be configured.
The AuthAdminService default implementation in the com.appinf.osp.auth.data bundle is configured using the global application configuration file. At least the auth.db.connector and auth.db.connectionString configuration properties must be specified.
The following configuration properties are available:
This setting specifies which SQL database backend to use for accessing the database. Valid values are "ODBC", "MySQL" and "SQLite". The respective POCO Data bundle (poco.data.odbc, poco.data.mysql or poco.data.sqlite) must be available as well.
If this setting is not specified, the AuthAdminService will be disabled.
This setting specifies the connection string for connecting to the specific database instance. For SQLite, this is simply the path of the database file to use. For MySQL, the format of this string is:
For ODBC, please refer to your system's ODBC documentation for obtaining the connection string.
This setting allows configuring the maximum number of entries in the internal permissions cache. This is used to reduce database accesses for user authorization and thus speed up operation. Default is 1024. Should be at least the number of maximum concurrent users expected on the system.
This setting allows configuring the timeout of the password cache. The password cache is used to reduce database accesses or LDAP lookups (if LDAP authentication is enabled).
Specifies the version of the password hashing algorithm.
- Version 1 uses MD5 with a global salt. This is considered insecure and should no longer be used.
- Version 2 uses PBKDF2 with HMAC-SHA1 and per-user random salt (default).
- Version 3 uses PBKDF2 with HMAC-SHA1 and per-user random salt with additional MD5 password hashing allowing implementation of secure challenge-response authentication mechanisms such as SCRAM-SHA1 (recommended).
New deployments should use Version 3. Also, existing deployments should be upgraded to use this version. A user's hash will automatically be upgraded when the user successfully authenticates. Note that the default version is 2; version 3 has to be explicitly configured by setting the auth.hashVersion configuration property.
The length of the generated per-user salt in bytes. Defaults to 7.
The number of iterations for the PBKDF2 algorithm. Defaults to 1024, but should be configured to 10000 for new deployments. Note that existing Version 2 hashes cannot be validated anymore if this value is changed. This does not affect Version 3 hashes.
An additional salt value for the Version 3 initial MD5 hash that is the input for the main PBKDF2 hash. Defaults to "poco". Can be left at default value. If changed while in deployment, Version 3 hashes cannot be validated anymore.
If user authentication via LDAP is enabled, this setting specifies the URI of the LDAP server to use. Example: ldap://ldap-server.company.com (unencrypted connection) or ldaps://ldap-server.company.com (secure connection).
If user authentication via LDAP is enabled, this setting specifies the distinguished name (DN) to bind to in order to authenticate a user. The DN must contain a placeholder (%s), which will be replaced during authentication with the actual username. Example:
If user authentication via LDAP is enabled, this setting can be used to configure the AuthAdminService to obtain user permissions from the LDAP server. For that purpose, the LDAP server must provide permissions using the LDAP attribute specified in this setting. If this setting is provided, all user permissions in the database will be replaced with the permissions provided by the LDAP server upon successful authentication.
If user authentication via LDAP is enabled, this setting can be used to configure the AuthAdminService to obtain user role assignments from the LDAP server. For that purpose, the LDAP server must provide role names using the attribute specified in this setting. If this setting is provided, all user role assignments in the database will be replaced with the roles provided by the LDAP server upon successful authentication.
If user authentication via LDAP is enabled, this setting can be used to configure the AuthAdminService to obtain additional user attributes from the LDAP server containing application-specific information. The attribute names must be comma-separated. Once obtained from the LDAP server, the attributes and their values can be queried using the getUserAttribute() and attributesForUser() methods.
The AuthAdminService provides methods for managing users, roles and permissions. Please refer to the documentation of the Poco::OSP::Auth::AuthAdminService interface and the Poco::OSP::Auth::Data::AuthAdminServiceImpl class for more information.
The AuthAdminService is registered under the service name "osp.auth" and can be obtained using the Poco::OSP::ServiceFinder helper class:
Poco::OSP::Auth::AuthAdminService::Ptr pAuthService = Poco::OSP::ServiceFinder::find<Poco::OSP::Auth::AuthAdminService>(pContext);
In order to manage users, roles and permissions, the auth shell command is provided. The command is implemented in the com.appinf.osp.auth.command bundle.
In order to use the auth command, the user must have the authAdmin permission.
From within the OSP Shell, enter auth command without arguments for a help screen.
To create a user account, use the auth add user command and specify the user name and its password as arguments. The following command will create a user named alice with the password s3cr3t.
osp> auth add user alice s3cr3t
To grant a permission to a user, use the auth grant user command, giving the user name and permission as argument. For example, to grant user alice access to the Bundle Administration Utility web application and related shell commands:
osp> auth grant user alice bundleAdmin
If multiple user accounts should have the same permissions, it makes sense to define a role. This is done with the auth add role command. For example, to define a role named superUsers:
osp> auth add role superUsers
To grant a permission to a role, use the auth grant role command, giving the role name and permission as argument. For example, to grant role superUsers access to the Bundle Administration Utility web application and related shell commands:
osp> auth grant role superUsers bundleAdmin
To assign a role to a user, use the auth assign command, giving the user name and role name as arguments. For example, to assign user alice the role superUsers:
osp> auth assign alice superUsers
To revoke a role from a user, use the auth unassign command, giving the user name and role name as arguments. For example, to remove the role superUsers from user alice:
osp> auth unassign alice superUsers
A permission can be revoked from a user or role with the auth revoke user, or auth revoke role command, respectively. Specify the user or role name and permission as arguments. Example:
osp> auth revoke user alice bundleAdmin
To change a user’s password, use the auth passwd command, giving the user name and new password as arguments. Example:
osp> auth passwd alice sup3rs3cr3t
To display information about a specific user, role or permission, or to list all defined users, roles and permissions, use the auth show command. For example, to show the admin user:
osp> auth show user admin
Optionally, AuthAdminService can use LDAP for user authentication and authorization. LDAP can be used for authentication (validating passwords) only, or for both authentication and authorization (obtaining a list of permissions and role assignments for an user).
To enable LDAP authentication, the following configuration settings must be added to the global application configuration file:
To enable LDAP authorization, additionally the following configuration settings must be added to the global application configuration file:
- auth.ldap.roleAttribute (optional)
Specifically, for LDAP authorization, the LDAP server must provide the attribute specified in the auth.ldap.permissionAttribute configuration setting. This attribute is used to store the permissions for a user. Furthermore, in order to provide role assignments as well, the LDAP server must provide the attribute specified in the auth.ldap.roleAttribute configuration setting.
If the LDAP server provides permissions and roles, these always replace the permissions and roles stored for that user in the database. Permissions and roles are obtained from the LDAP server immediately after the user account has been successfully validated by performing an LDAP bind operation with the user’s credentials.
Permission assignments to roles are always stored in the AuthAdminService database.
If the LDAP server is unavailable, the AuthAdminService falls back to the configured database.